Antratek alternatives in 2026

If you are looking for Antratek alternatives in 2026 and your project is IoT hardware, start with the LoRaWAN gateways at Kilo Electronics, an online authorised dealer that sells to individuals, makers and businesses across Europe. Antratek is a solid supplier of development boards and wireless modules. It stops being enough when you need gateways, sensors and antennas from several manufacturers in one basket. The best Antratek alternative in 2026 is Kilo Electronics if you are building a LoRaWAN, NB-IoT or Bluetooth system; Reichelt or Berrybase if you need general electronics and maker parts; Mouser if you need individual components in bulk.

Why look beyond Antratek in 2026

Antratek is a Dutch online electronics supplier. Buyers know it for development boards, wireless modules and IoT building blocks. For a prototype on a workbench, that is often exactly right.

The ceiling appears when a prototype becomes an installation. A working LoRaWAN network needs a sensor, a gateway, a network server and an application. A shop that covers the module but not the gateway, antenna and power supply leaves you buying across several sites, and you carry the compatibility risk yourself.

Three situations push buyers to look elsewhere:

• You need a complete set of parts. Sensors, gateway, antenna, cable and power supply from one basket.
• You need a different protocol mix. LoRaWAN, mioty, NB-IoT and Bluetooth hardware side by side.
• You buy for a different country. Delivery terms, tax handling and radio-plan requirements vary across the EU, the UK and Switzerland, so a supplier closer to your own market can be easier to work with.

None of this makes Antratek a bad choice. It makes it one option among several, and the right alternative depends on what you are building.

Antratek alternatives at a glance

The comparison basis is simple: what each supplier is best known for, who it fits, and how it differs from Antratek. It is an editorial comparison of buying routes, not a measured test of hardware or service. Check live terms with each supplier before ordering.

1. Kilo Electronics: best for complete IoT hardware sets

Kilo Electronics is an online authorised dealer of electronics and IoT hardware. It sells to anyone: individuals, makers, hobbyists, professionals and businesses. The catalogue covers sensors, gateways, controllers, modules, antennas, power supplies and connectivity accessories from multiple manufacturers.

The practical advantage is in the basket. A LoRaWAN sensor is useless without a gateway in range, and a gateway needs the right antenna and power arrangement. Buying these together means one place to compare options across brands, rather than assembling a parts list from three shops.

Where Kilo Electronics shines

• Hardware for LoRaWAN, mioty, NB-IoT and Bluetooth in one catalogue.
• Gateways, sensors, controllers and antennas from several manufacturers, so you compare rather than accept one brand.
• Suits both a single test sensor and a larger deployment.
• Buyers choose the network and application that suit them; the store does not tie you to one platform.

Where Kilo Electronics falls short

• It is an IoT specialist. If you need resistors, connectors, hand tools and enclosures for general electronics work, a broad retailer such as Reichelt fits better.
• It does not carry every manufacturer on the market. Never assume a brand you saw in a comparison is stocked; check the category.
• It is an online dealer, so there is no counter to walk up to.

Best for: anyone assembling a working IoT system who wants gateways, sensors and accessories compared side by side.

If you are choosing a gateway, remember what a gateway does. It receives radio messages from LoRaWAN sensors and forwards them to a network server. Its channel count says little about how many sensors it will serve; traffic, airtime and site conditions decide that. Cellular backhaul on a gateway connects the gateway to the internet. It does not make your sensors NB-IoT devices.

2. Reichelt: best for general electronics

Reichelt is a long-established German electronics retailer with a very wide catalogue: components, tools, cables, power supplies, networking and maker boards. For a project that mixes IoT with ordinary electronics work, it removes the need for a second shop.

Where Reichelt shines

• One basket for components, connectors, tools and consumables.
• A broad catalogue that suits repair, education and small builds.

Where Reichelt falls short

• IoT is one category among many, so you get less guidance on gateway, network server and sensor fit.
• You do the compatibility work yourself when mixing radio hardware.

Best for: mixed electronics projects where IoT is one part of the bill of materials.

Compared with Antratek, Reichelt is broader and less specialised. If your list is mostly passive parts and tools, that is an advantage. If your list is mostly radios and sensors, it is not.

3. Berrybase: best for Raspberry Pi and maker projects

Berrybase is a German retailer built around the maker market, with a strong Raspberry Pi focus. It suits hobbyists and students who want boards, displays, sensors and accessories for small projects.

Where Berrybase shines

• Approachable range for beginners and hobby builds.
• Good fit when your project is built around a single-board computer.

Where Berrybase falls short

• Less depth for outdoor gateways, industrial sensors and long-range radio planning.
• Maker-first, so larger deployments mean sourcing elsewhere.

Best for: hobby projects and teaching setups.

Compared with Antratek, Berrybase leans further toward the hobbyist and further from professional wireless modules.

4. Botland: best for a large maker catalogue

Botland is a Polish online shop covering robotics, maker boards, modules and sensors. Buyers in Central and Eastern Europe may find its catalogue and regional focus convenient.

Where Botland shines

• Wide hobby and robotics range.
• Useful second source when a board or module is out of stock elsewhere.

Where Botland falls short

• Less focused on LoRaWAN deployments, gateways and protocol-specific planning.
• Terms for buyers in other countries should be confirmed per order.

Best for: robotics and maker builds that need many small modules.

Do not read the shop's country as a verdict on service quality. Check delivery and tax terms for your own destination before you order from any supplier.

5. Mouser: best for component-level sourcing

Mouser is a global distributor of manufacturer-authorised electronic components. Engineers use it to buy the parts that go onto their own boards: radio chips, microcontrollers, connectors and power components.

Where Mouser shines

• Component depth and manufacturer-authorised sourcing for custom designs.
• Suits teams that design their own hardware and need parts in volume.

Where Mouser falls short

• It sells parts, not finished IoT systems. Choosing the gateway, antenna and network setup is your job.
• Overkill for a buyer who just wants a working sensor network.

Best for: companies designing custom hardware.

If you are building a custom gateway rather than buying one, a concentrator module from a dealer such as Kilo Electronics may save design time. If you are designing the whole board, Mouser is the more natural source.

Why people switch from Antratek

The reasons that hold up are about fit, not fault:

• Project scope grew. A module prototype turned into a multi-site installation, and the buyer now needs gateways, antennas and power supplies too.
• Protocol needs changed. A team started with Bluetooth and now needs LoRaWAN or NB-IoT hardware, or wants to compare brands for each.
• Sourcing preferences. Some buyers want a supplier with terms that suit their own country or company purchasing process.
• Broader parts list. A project that needs general electronics alongside wireless gear can be easier with a larger retailer.

None of these is a complaint about Antratek. They are reasons the buying route no longer matches the project.

Which alternative fits your project

Pick by what you are actually buying:

• A LoRaWAN sensor network: Kilo Electronics. Start with the gateway, because it sets what your sensors can reach, then choose sensors and antennas to match.
• A mixed electronics build: Reichelt.
• A Raspberry Pi hobby project: Berrybase.
• A robotics or maker build with many modules: Botland.
• A custom board: Mouser.

Before you commit to any supplier in 2026 or 2027, check four things:

1. Radio plan. EU868 hardware, at 868 MHz, differs from other regions. Confirm the variant matches where it will be installed.
2. Indoor or outdoor use. An outdoor gateway needs a suitable enclosure and antenna placement; an IP rating does not cover every mounting arrangement.
3. Power. Mains, PoE or solar changes the accessories you need and the total installed cost.
4. Network server. Decide whether you will use a hosted service or run one yourself. A self-hosted server means you maintain it.

Total cost is not the shelf price

A cheap module can become an expensive installation. Count the gateway, the antenna and cable, the power supply or PoE injector, any enclosure, and the time spent on payload decoding and network setup.

A realistic example: a facilities team wants temperature sensors in several rooms of one building. The sensors are the small part of the bill. The gateway placement, its power and its backhaul decide whether the readings arrive reliably. A supplier that lets you compare gateways and sensors together helps you see that cost before you order.

This is a hypothetical example, not a customer deployment.

When staying with Antratek is the right call

Stay with Antratek if you already buy its boards and modules, your project is still at the prototype stage, and nothing on your list is missing. Switching suppliers has a cost: new account, new terms, new product pages to learn. If your current route works, keep it.

Switch when your list outgrows the shop, not before.

FAQ

One last thing

Before you pick a supplier, write down your gateway, antenna and power plan first. Most failed IoT rollouts in 2026 and 2027 will trace back to coverage and power, not to the sensor you bought. Choose the shop that lets you settle those two questions before you add anything to the basket.